![]() * Night mode is a new feature intended for use with low output lighting. To disable the Night mode function, remove the sensor from the control box. The 'Sensor' light will illuminate when Night mode is in operation. The sensor detects when the tank lights go out and slows the pump to half speed. ![]() *Night: When the two-pinned sensor is inserted into the two small plugs on the left-hand side of the control box, Night mode will function automatically. Press and hold the 'LOCK' light for a further 5 seconds to disable this feature. The red 'LOCK' light will illuminate and the control knob will no longer function. Lock: To prevent changes from inadvertently occurring by accidentally knocking the adjustable control knob, press and hold the 'FEED' button for 5 seconds. Alternatively, press the 'FEED' button again to start the pump. When the time has elapsed, the light will go off and the pump will be turned back on. Adjustable to form the wave best suited to your tank.Įlse: Reef Stream Mode, a mixed, changing pattern that creates a random flow cycle similar to what you would find in a natural reef.įeed: Press the 'FEED' button once, the blue '10min' light will illuminate indicating that the pump has been stopped for 10 minutes. W2 & W3: Pump gradually speeds up and slows down incrementally to create a varied flow pattern. S1 to S3 Mode: Based on the W1 Wavebox function provides 100% 75% and 50% Wave Adjust the controller to change the speed of the pulses and vary the size of the wave according to your tank. W1: Short pulses which, when timed correctly will create a back and forth motion and form a gentle standing wave in your tank. L: Low, constant, non-variable flow at a third of the speed (10000 LPH) Press the 'MODE' button to cycle through the selection of functions. â?¢ Suitable for freshwater and saltwater.
0 Comments
Leave a Reply. |